How to Read a 10-K and 10-Q

Table of Contents

    Learning how to read a 10-K and 10-Q helps you move from a headline
    about a company to the evidence behind it. The useful question is rarely just
    “Did earnings increase?” It is “What changed, how does management explain it,
    and what do the financial statements and notes allow me to conclude?”

    You do not need to read every page in sequence on your first pass. Start with
    the business, identify the questions that matter, and follow those questions through
    management’s discussion, the statements and the notes. This guide explains that
    reading order and uses a historical Microsoft annual report and its next quarterly
    report to demonstrate it.

    What Do a 10-K and 10-Q Tell You?

    A Form 10-K is an annual SEC report that provides a business and
    financial baseline. A Form 10-Q supplies interim financial information
    and other updates after each of the first three fiscal quarters. Under the normal
    10-Q reporting cycle, there is no separate fourth-quarter 10-Q; the year-end report
    is the 10-K.[1]
    [3]

    Read for a supported answer

    The business description tells you what the company does. MD&A gives
    management’s explanation. The statements and notes provide reported financial
    evidence and accounting context. Your conclusion should distinguish those
    disclosures from your own inference.

    This walkthrough concerns U.S. domestic SEC-reporting operating companies.
    Foreign private issuers often use other reports, including Form 20-F and Form 6-K;
    6-K is not simply a foreign version of the quarterly 10-Q. Funds and specialized
    issuers also have different reporting frameworks.[8]
    Even within 10-K/10-Q reporting, smaller reporting companies and emerging growth
    companies can have different disclosure accommodations.

    The company prepares its reports. The SEC sets disclosure requirements and
    reviews filings, but does not vouch for their accuracy.[1]
    A filing is a primary research source, not an SEC endorsement or an investment
    recommendation. Use it within a broader fundamental
    analysis
    of the business and its valuation.

    10-K vs. 10-Q: Annual Baseline and Interim Update

    Keep the latest relevant annual report open while reading a quarterly update.
    The following comparison describes the usual operating-company presentation;
    always read the actual report’s headings, dates and applicable reporting basis.

    How the two reports work together
    Question Form 10-K Form 10-Q
    What is its role? Annual business, risk and financial baseline. Interim financial results and material developments.
    Where are the financials? Part II, Item 8. Part I, Item 1.
    Where is MD&A? Part II, Item 7. Part I, Item 2.
    How are risks presented? Part I, Item 1A, when required. Part II, Item 1A addresses material changes to annual risk factors, when required.
    What assurance applies? Annual financial statements are audited. Interim statements generally are unaudited and subject to an independent accountant’s review before filing.
    How much detail repeats? Provides the fuller annual accounting context. May condense statements and omit substantially duplicative annual-note disclosures.

    The item locations come from the current SEC forms. Smaller reporting companies
    are exempt from the standard risk-factor item in both forms, so a missing Item 1A
    does not by itself establish a reporting failure.[2]
    [3]
    Interim reporting rules explain the condensed presentation and annual-report
    context; a review has substantially less scope than an audit.[4]
    [5]

    Confirm the Filing Before Reading the Results

    Open the company’s filing in SEC EDGAR or its investor-relations archive, then
    confirm the legal issuer and form. On EDGAR, select the main 10-K or 10-Q document
    from the filing’s document list. An exhibit, earnings release or shareholder letter
    can serve a different purpose from the main report.

    • Issuer: Record the company name and Central Index Key (CIK), the SEC’s company identifier.
    • Report period: Read the fiscal year or quarter ended date on the cover.
    • Filing date: Record when the report was filed; this is later than the period it describes.
    • Version: Save the accession number, which identifies the submission, and check for relevant amendments.
    • Reporting status: Notice the filer-status and smaller-reporting/emerging-growth checkboxes before assuming uniform disclosures.

    An amendment carries an /A suffix, such as 10-K/A. Read its
    explanatory text and the amended items alongside the original report. An amendment
    need not replace the entire report or restate every financial statement; the rule
    requires the complete text of each item that is amended.[11]
    The suffix alone does not tell you the reason for the change.

    Also follow incorporation by reference: a report can satisfy
    certain items by referring you to specified material in another document. Part III
    governance and compensation information may point to a definitive proxy statement.
    The 10-K’s cover and item responses tell you where to continue.[2]
    An annual report to shareholders may reproduce the 10-K, but the two labels do not
    always identify the same document.[1]

    Do not assume everything available on EDGAR has identical filing status. For
    example, Microsoft’s July 30, 2025 earnings-release 8-K expressly says its release
    is furnished as Exhibit 99.1 and describes the applicable filed/furnished distinction.[12]
    That release does not become the annual 10-K merely because both appear in the archive.

    For developments reported between periodic filings, use the Form 8-K guide to identify the relevant event item, read its exhibits and check the applicable reporting deadline.

    Where to Look in a 10-K

    Use the report’s table of contents to move between the following main locations.
    This is a question map, not an exhaustive list of every required item. Current
    Form 10-K includes Item 1C, Cybersecurity; older guides may omit it.[2]

    Match an investor question to a filing location
    Location Reader’s question
    Part I, Item 1: Business What does the company sell, to whom, and under what competitive and operating conditions?
    Part I, Item 1A: Risk Factors What disclosed risks could materially change the business or security’s outcome?
    Part I, Item 1C: Cybersecurity How does the company describe cybersecurity risk management, strategy and governance?
    Part I, Item 3: Legal Proceedings Which reportable proceedings need further reading, including referenced contingency notes?
    Part II, Item 5: Equity and repurchases What is disclosed about common equity, shareholder matters and issuer share purchases?
    Part II, Item 7: MD&A Why did results change, and what does management say about liquidity, capital needs and uncertainties?
    Part II, Item 7A: Market Risk What is the disclosed exposure to interest rates, currencies or other market variables?
    Part II, Item 8: Financial Statements and Supplementary Data What was reported, under which accounting policies, with what supporting notes and audit report?
    Part II, Items 9 and 9A: Accountants; Controls and Procedures Are there relevant accountant changes/disagreements, reporting-control conclusions or weaknesses?
    Part III; Part IV, Item 15 Where are governance, pay and ownership disclosures, and which exhibits or contracts should I follow?

    Use an item’s cross-reference even when the answer is not printed under that
    heading. For example, legal proceedings can lead to a financial-statement note.
    Specialized issuers have additional or different instructions; read the actual
    report rather than treating this map as a universal completeness test.

    An Efficient Reading Order for Investors

    The SEC prescribes the document’s organization. The sequence below is a suggested
    research method, not a filing rule or a promise that a quick pass is sufficient.

    1. Orient yourself. Confirm the report identity, fiscal calendar and table of contents.
    2. Understand the business. Read Item 1 and the segment descriptions. Write down how the business earns revenue and what it must spend to operate.
    3. Identify the consequential risks. Read Item 1A when provided, then select the risks most relevant to your question.
    4. Read management’s explanation. Use MD&A to identify changes, stated causes, liquidity needs and critical estimates.
    5. Follow the evidence. Open the related financial statement and notes immediately, rather than saving all notes until the end.
    6. Check the assurance and controls. Read the auditor’s opinion and relevant control disclosures, then follow exceptions or cross-references.
    7. Record an answer and a follow-up. Separate what the filing supports from what remains uncertain, and check later reports for developments.

    Experienced readers may start with an unusual debt maturity, legal matter or
    reported loss. The same method still works: locate the issue, understand its
    business meaning, and trace it across the relevant sections. Reading many pages
    without resolving a question is less useful than preserving a clear source trail.

    Read MD&A, Risk Factors and Notes Together

    MD&A: Look for the reason behind the movement

    Management’s Discussion and Analysis (MD&A) provides
    management’s perspective on financial condition and results. Current Item 303
    focuses on material changes, liquidity and capital resources, and known material
    events and uncertainties.[6]
    When revenue rises, ask whether the discussion identifies volume, price, business
    mix, acquisitions or currency effects. When a margin changes, look for the costs
    and business lines management identifies rather than assuming every movement has
    the same cause.

    Keep three statements separate in your notes: the reported result,
    management’s explanation and your interpretation.
    For example, a generic claim that customers are taking longer to pay raises a
    question about collections. The receivables note and cash-flow discussion may help
    answer it. The claim alone does not establish that all receivables are uncollectible.

    Risk factors: Connect the risk to an economic consequence

    For a risk relevant to your thesis, identify the mechanism: what could happen,
    which revenue, cost, asset or financing need could be affected, and where related
    facts appear elsewhere in the report. Customer concentration can lead you toward
    revenue disclosures; refinancing exposure toward debt maturities and liquidity;
    litigation toward the contingency note.

    Compare changed wording with the earlier filing, then ask whether the change
    describes a new event, a changed exposure or a clarification. A risk factor does
    not necessarily quantify a probability or loss. Its length, position or newly added
    wording is insufficient by itself to conclude that fraud occurred or an adverse
    outcome is certain.

    Notes: Read the measurement and the conditions

    Notes explain accounting policies, disaggregation, estimates and obligations
    behind statement totals. For a consequential line, ask what is included, when it
    is recognized, what judgments affect it and what related commitments are disclosed.
    Use the three financial statements guide
    for accounting relationships; here, the task is finding the disclosure that answers
    your question.

    Distinguish an accounting policy from a critical accounting
    estimate
    . The policy describes the treatment; the estimate involves
    uncertain assumptions that can materially affect reported results. Item 303’s
    critical-estimate discussion should supplement the policy note, including material
    information about estimation uncertainty.[6]
    Read both before assuming an apparently precise reported balance is free of judgment.

    Segment data: Check what each business label includes

    Read the segment definition and profitability measure before interpreting a
    segment trend. Ask whether a product moved between segments, prior periods were
    recast, or the measure differs from consolidated net income. A familiar segment
    name does not guarantee a constant business boundary. See
    segment reporting for the accounting framework.

    A historical example is Microsoft’s FY2025 10-K: it explains segment-composition
    changes and recast prior-period segment information. Note 1 says the recast did
    not affect its consolidated balance sheets, income statements or cash-flow
    statements.[9]
    The reading lesson is to find the comparability explanation before interpreting
    a change in a business line.

    A Filing Walkthrough: Follow a Capital-Spending Question

    Consider this research question: “Where can I see the cash investment
    and related lease commitments behind Microsoft’s cloud-infrastructure discussion?”

    Use its historical FY2025 10-K, filed July 30, 2025 for the year ended June 30,
    2025, and the following 10-Q, filed October 29, 2025 for the quarter ended
    September 30, 2025. Microsoft identified itself as a large accelerated filer in
    the annual cover.[9]
    [10]

    The cash-flow amounts below are U.S. dollars in millions, shown
    as outflows. The annual column covers twelve months; the next-quarter column covers
    three months. The question concerns where to find different kinds of evidence,
    not a calculation of total AI spending or a comparison of spending rates.

    Follow the question through the annual and quarterly filings
    Evidence needed FY2025 10-K Next 10-Q
    Management’s investment context Part II, Item 7: liquidity/capital-resources discussion and planned capital uses. Part I, Item 2: updated discussion of the same subject.
    Reported cash spending Item 8 cash-flow statement: additions to property and equipment, (64,551) for the year ended June 30, 2025. Part I, Item 1 cash-flow statement: additions to property and equipment, (19,394) for the three months ended September 30, 2025.
    Lease details Item 8, Note 13: Leases. Part I, Item 1, Note 12: Leases.
    Annual context still needed Preserve the annual report and its supporting notes. Note 1 and MD&A direct readers back to the FY2025 10-K.

    The PP&E row establishes cash additions to the company’s property and
    equipment, not a complete or exclusively AI-investment total. The lease note answers
    different questions about contractual arrangements and obligations. Follow its
    definitions before combining any amounts. Both reports are historical navigation
    examples, not evidence about Microsoft’s current spending plans.[9]
    [10]

    Notice that the lease note number changed. Search the note title
    and use the table of contents or cross-reference rather than assuming “Note 13”
    will always mean leases. A useful follow-up is: which cash payments, noncash asset
    additions and future commitments does each disclosure measure? Preserve that question
    until the definitions support a consistent answer.

    Begin with what changed since your annual reading. Locate interim MD&A,
    financial statements and notes, then review legal developments, risk changes and
    controls. A shorter note does not mean the annual issue disappeared: interim rules
    allow substantially duplicative annual disclosure to be omitted in context.[4]

    Read the dates printed above each statement. Under the usual Rule 10-01
    presentation, the statements answer different timing questions. Special reporting
    bases and exceptions exist, including a seasonal single-crop agricultural provision;
    the report’s own headings remain essential.[4]

    Read the period before reading the movement
    Section Usual interim presentation Reading question
    Balance sheet Latest quarter-end and preceding fiscal-year-end balances. What changed in the financial position between these dates?
    Income/comprehensive income Current quarter and fiscal year to date, with corresponding prior-year periods. Am I reading the quarter alone or cumulative activity?
    Cash flows Fiscal year to date and corresponding prior-year period. Does this describe the quarter or several quarters together?
    Notes and MD&A Interim disclosures and material-change discussion in the annual context. Which earlier explanation still applies, and what has changed?

    In the first fiscal quarter, quarter and fiscal-YTD durations coincide. Later,
    a cash-flow column may cover six or nine months even though the document is called
    a quarterly report. For tagged-fact selection and consistent quarterly derivations,
    use the XBRL and structured financial data guide.

    For risks, compare Part II, Item 1A with the annual baseline, when required.
    Its instruction concerns material changes to previously disclosed annual risks;
    it is not a requirement to reproduce the entire annual list.[3]
    For operating trends, check whether management is comparing corresponding prior-year
    periods or a stated sequential quarter. Seasonal patterns can make a simple
    quarter-to-quarter comparison misleading.

    What the Audit, Review and Controls Disclosures Establish

    In the 10-K, read the independent auditor’s report for its opinion, named financial
    statements and periods. The audit does not turn every business forecast or MD&A
    statement into an audited assertion. Follow any qualification, going-concern
    discussion or critical audit matter in context; the
    audit opinions guide explains those distinctions.

    Unaudited interim statements can still have been independently reviewed.
    A review primarily uses inquiries and analytical procedures and is substantially
    less extensive than an audit; the accountant does not express an audit opinion on
    the interim information. A separate review report is not automatically displayed
    in every 10-Q.[4]
    [5]

    Also distinguish management’s controls assessment from an
    auditor’s internal-control attestation. The latter is not required
    for every filer: Item 308 has emerging-growth-company and filer-status distinctions,
    as well as a transition provision for newly public companies.[7]
    Read what the actual report includes before interpreting an absence.

    A disclosed material weakness deserves follow-up on the affected process,
    potential consequences and remediation. It is not, by itself, a finding that every
    reported figure is wrong or that fraud occurred. Similarly, a favorable opinion
    is not a guarantee of future solvency, operating success or investment returns.

    Build a Filing Note You Can Update

    Finish with a short research record organized around your question. Keep enough
    detail to find the same passage again, and preserve uncertainty instead of filling
    it with an unsupported assumption.

    • Identity: Issuer/CIK, form, accession, report period, filing date and relevant amendment.
    • Question: The business issue you are trying to resolve.
    • Evidence: Part/item, statement row and note title, with dates and units for any figures.
    • Explanation: What management says caused the result.
    • Assessment: What the evidence supports, what it does not establish and any comparability issue.
    • Next check: The later filing, contract, estimate or independent evidence needed.

    If you began with a vendor summary, use stock tear
    sheets
    to check its field definitions and dates, then retain the underlying
    filing trail. If the next task is valuation, move to
    comparable companies analysis after
    establishing what the reported inputs actually mean.

    Common Mistakes When Reading 10-Ks and 10-Qs

    • Reading only the earnings headline. Follow the related MD&A explanation, statement and note.
    • Confusing the filing date with the measurement date. A later publication still describes the identified earlier period or balance.
    • Assuming every quarterly column is one quarter. Read the exact period above each column, especially cash flows.
    • Skipping notes because a ratio looks familiar. Policies, obligations and changed definitions can alter the interpretation.
    • Treating an omitted quarterly discussion as resolution. Return to the annual baseline and examine actual updates.
    • Using a fixed note number across years. Follow titles and cross-references; note numbering can change.
    • Equating unaudited with unreviewed, or audited with guaranteed. Identify the actual assurance scope.
    • Calling a new risk or amendment proof of misconduct. Read the event, explanation and evidence before drawing a conclusion.

    Limitations of What a Filing Can Tell You

    A documented past is not a complete forecast

    A filing contains historical results, estimates and disclosures made under a
    reporting framework. It does not eliminate uncertainty about customers,
    competition, financing or the price you should pay for the security.

    Information can develop after the report period and after filing. Check later
    reports and relevant announcements when the question is current. A company-level
    filing also cannot supply every independent industry fact or verify every management
    prediction. Use external evidence where needed and keep its date and source separate.

    Disclosure accommodations, materiality judgments, incorporation by reference and
    accounting estimates affect presentation. An unanswered question is a reason for
    further research, not permission to invent a value or assume the most reassuring
    explanation. A useful first reading produces a defensible answer plus the remaining
    questions.

    Frequently Asked Questions


    Confirm the issuer and dates, then understand the business and its main risks. Read MD&A to identify consequential changes and immediately follow them to the statements and notes. Finish with the audit and relevant controls disclosures. This is a suggested research order; the right starting point can change with your question.


    Interim reporting can condense statements and omit substantially duplicative annual-note information. The annual report supplies context for policies, business structure and risks, while the quarterly report supplies interim information and developments. A topic’s absence from the shorter report does not necessarily mean it ceased to matter.[4]


    They generally are unaudited interim statements subject to an independent accountant’s review before filing. Review procedures are substantially less extensive than an audit and do not result in an audit opinion on the interim information. Read the actual report and assurance wording rather than treating “unaudited” as “no independent work.”[4] [5]


    Under the normal reporting cycle, Form 10-Q is filed after the first three fiscal quarters, not the fourth. Look for the annual 10-K and separately identify any year-end earnings release. Do not assume an earnings release and the annual report have the same scope or assurance.[3]


    The /A means the report is an amendment. Read its explanation and amended items to determine what changed. The suffix alone does not establish a financial restatement, nor does an amendment necessarily reproduce every unchanged part of the original report.[11]


    Sometimes. A company may use its 10-K as its annual report to shareholders, or publish a separate report with different presentation and content. Confirm which document you have, follow incorporated material and distinguish accompanying shareholder commentary from the specified audited financial statements.[1]

    Sources and Methodology

    Primary sources accessed November 13, 2026. The SEC form PDFs retrieved were
    marked 02-25. The eCFR pages displayed updates through November 9 or 10, 2026;
    check current rules for a reporting decision. The suggested reading order is an
    analytical workflow, not a compliance checklist. Microsoft examples concern the
    specified historical reports and do not assess its latest filings or stock.

    1. SEC Office of Investor Education and Advocacy, How to Read a 10-K/10-Q, January 25, 2021: company/SEC roles, annual-report distinction, statements and notes.
    2. SEC, Form 10-K: current retrieved instructions, item structure, scaled disclosure and incorporation by reference.
    3. SEC, Form 10-Q: General Instruction A, Parts I/II and Item 1A.
    4. eCFR, 17 CFR 210.10-01: Interim financial statements, particularly (a)(5), (c) and (d).
    5. PCAOB, AS 4105: Reviews of Interim Financial Information, paragraphs .03 and .07–.09; current version before the flagged December 15, 2026 amendment.
    6. eCFR, 17 CFR 229.303: MD&A, objective, material-change discussion, critical estimates and interim analysis.
    7. eCFR, 17 CFR 229.308: Internal control over financial reporting, management report, auditor attestation and transition provision.
    8. SEC/Investor.gov, Using EDGAR to Research Investments, filing descriptions and foreign private issuers.
    9. Microsoft, FY2025 Form 10-K, year ended June 30, 2025, filed July 30, 2025, accession 0000950170-25-100235: cover, Item 7, cash flows and Notes 1, 13 and 18. EDGAR filing detail.
    10. Microsoft, Form 10-Q for September 30, 2025, filed October 29, 2025, accession 0001193125-25-256321: Part I Items 1/2, cash flows, Notes 1/12. EDGAR filing detail.
    11. eCFR, 17 CFR 240.12b-15: Amendments, /A designation and amended-item text.
    12. Microsoft, July 30, 2025 Form 8-K, Item 2.02 and the earnings-release exhibit’s furnished status.
    Disclaimer

    This article is for educational and informational purposes only and does not
    constitute investment, accounting, legal or tax advice. Reporting requirements
    and issuer circumstances vary. Historical filing examples are not investment
    recommendations. Review original filings and current guidance before relying
    on information for a decision.