Bond Swaps: Costs, Yield and Risk
Table of Contents
Bond swaps replace a bond you own with another bond. The decision starts with the cash the sale actually releases: a higher replacement coupon means little until you account for the sale price, accrued interest, purchase price, fees and amount of face value you can afford.
A useful comparison follows the same money through both alternatives: keep the existing bond, or sell it and buy the replacement. It then asks what happens to payment dates, principal, yield and risk. This guide uses fully hypothetical U.S.-dollar bonds to show that comparison, with a separate, limited discussion of U.S. taxable accounts.
What Is a Bond Swap?
A bond swap is a sale of one bond followed by a purchase of another using the proceeds. Investors may seek more income, different credit exposure, a shorter maturity, stronger call protection or a tax outcome. Those objectives describe the reason for trading; they do not establish that the replacement improves the portfolio. [1]
Face value, market value and spendable sale proceeds are different amounts. Buying the same face value of a replacement may require extra cash. A fair comparison either includes that extra contribution or sizes the purchase to the actual sale proceeds.
This use of “swap” concerns replacing securities. An interest rate swap is a derivative contract exchanging cash flows under agreed terms; it need not involve selling the bond you hold. The two transactions can change interest-rate exposure through different mechanics.
From Bond Prices to Settlement Cash
Bond prices are commonly quoted per $100 of par, or face value. A clean price excludes accrued coupon interest. The dirty, or full, price adds it back. Accrued interest compensates the seller for the part of the coupon period already elapsed; it also consumes cash when you buy between payment dates. The applicable day-count convention determines the amount. [3] [4]
A broker acting as agent may charge a separate commission; a dealer’s principal quote may already incorporate a markup or markdown. Ask what the quoted amount includes. Do not add an estimated spread or markup again to an all-in executable price. Selling before maturity can also produce substantially different proceeds from par. [3] [7]
Bond Swap Example: Size the Replacement First
Suppose you hold $100,000 par of a fictional 4% bond and consider a fictional 5% replacement. Both settle on July 1, 2027, with no outside cash or borrowing. Both are fixed-rate, senior unsecured corporate bullet bonds: they repay par at maturity, have no calls or sinking fund, and make regular semiannual payments. All prices, ratings and fees below are hypothetical.
Assume 30/360 day counting, $1,000 purchase increments with no other minimum, and a separate flat $50 commission on each trade. The held bond last paid on April 1; the replacement last paid on May 1. Thus 90 and 60 interest days, respectively, have elapsed at settlement. Availability and common settlement are assumptions, not a guarantee that two real orders execute together.
| Term | Held bond | Replacement |
|---|---|---|
| Annual coupon | 4% of par | 5% of par |
| Payment dates | April 1, October 1 | May 1, November 1 |
| Maturity | October 1, 2030 | November 1, 2033 |
| Assumed credit rating | AA | BBB |
| Clean bid / ask, per $100 par | 98.00 / 98.20 | 100.50 / 101.00 |
| Trade side used now | Sell at 98.00 bid | Buy at 101.00 ask |
1. Calculate Net Sale Proceeds
The held bond’s clean sale amount is $100,000 × 98 / 100 = $98,000. Accrued interest is $100,000 × 4% × 90 / 360 = $1,000. Its dirty sale amount is therefore $99,000 before the separate fee.
The replacement budget is $98,000 + $1,000 − $50 = $98,950. This is settlement cash before any tax reserve. A taxable gain or interest receipt can create a separate tax obligation, so an actual investor may need to retain more cash.
2. Buy Only the Par the Budget Supports
Each $1,000 of replacement par requires $1,000 × 101 / 100 + $1,000 × 5% × 60 / 360 = $1,018.3333 before the flat purchase fee. Reserve that $50 fee first: ($98,950 − $50) / $1,018.3333 = 97.1195 units. Whole $1,000 increments allow 97 units, or $97,000 par.
| Use of cash | Calculation | Amount (USD) |
|---|---|---|
| Replacement clean price | $97,000 × 101 / 100 | 97,970.00 |
| Replacement accrued interest | $97,000 × 5% × 60 / 360 | 808.33 |
| Purchase commission | Separate flat fee | 50.00 |
| Residual cash | $98,950 − $98,828.33 | 121.67 |
| Total allocated | Purchase cost plus cash | 98,950.00 |
The next increment would cost $98,000 × (1.01 + 5% × 60 / 360) + $50 = $99,846.67, exceeding the budget. Buying $100,000 par just to preserve the old face amount would use additional resources.
3. Compare Coupon Dollars and Their Dates
Keeping the bond produces $100,000 × 4% = $4,000 in annual scheduled coupons. The replacement produces $97,000 × 5% = $4,850, an $850 annual increase, with $121.67 left in cash. It also promises $3,000 less principal at a later maturity.
The old bond’s next $2,000 coupon arrives October 1; the replacement’s next $2,425 arrives November 1. You paid $808.33 of accrued interest for the replacement, so the entire next coupon is not newly earned income. Map payment dates against spending needs rather than comparing coupon rates alone.
Keeping the Bond vs Swapping: What Changes?
The coupon rises by one percentage point, but the yield change is much smaller. Discounting the specified remaining payments at a semiannual bond-equivalent YTM gives approximately 4.668% for the held bond at its bid and 4.814% for the replacement at its ask: a pickup of about 14.5 basis points. These yields exclude the separate commissions.
Coupon determines scheduled interest dollars on par. Yield to maturity is the discount rate connecting price with scheduled coupons and principal. Achieving the corresponding compound return requires the assumed payments, holding period and coupon reinvestment; YTM does not guarantee a one-year sale result. [4]
| Dimension | Keep | Swap |
|---|---|---|
| Modified duration at the stated initial price | About 2.98 years | About 5.34 years |
| Illustrative credit quality | AA issuer | Different BBB issuer; greater credit concern |
| Call protection | Noncallable | Noncallable; unchanged in this example |
| Quoted bid/ask width | 0.20 price points | 0.50 price points; more costly to reverse at these quotes |
| Cash-flow pattern | Earlier coupons and maturity | Different dates, higher coupons, less and later maturity principal |
Using the initial bond duration estimates, a one-percentage-point rise in each bond’s own yield implies approximately a 2.98% versus 5.34% price decline. This is a first-order approximation; convexity and unequal changes in rates or credit spreads matter. The replacement’s extra income comes with materially greater price sensitivity. [5]
Credit deterioration can reduce market value before any missed payment. Ratings do not replace issuer analysis, and the new spread need not converge to the old one. A wider bid/ask quote also warrants checking trade size and availability, rather than treating displayed prices as permanent liquidity. See bond market liquidity for that separate market-structure lesson. Yield differences can reflect credit, liquidity and other risks rather than mispricing. [6] [8]
If a real replacement is callable, the comparison changes again: inspect every relevant call date and price, yield to call and yield to worst, and the reinvestment problem if principal returns early. YTW does not cover default losses. An attractive coupon can disappear earlier than expected; read the actual indenture and offering terms. Our callable bonds and embedded options guide explains those contingencies. [3] [6]
A One-Year Comparison and Its Breakeven
Continue the same example to July 1, 2028. Assume all coupons are paid, coupon and residual cash earn 0%, taxes are excluded, and both alternatives are sold for a separate $50 fee at the end. Stipulate unchanged clean liquidation bids: 98.00 for the old bond and 100.50 for the replacement, despite both bonds aging. These are scenario inputs, not forecasts or an assumption of unchanged yields. Both bonds again have the same accrued-interest fractions as at entry.
| Ending component | Keep (USD) | Swap (USD) |
|---|---|---|
| Clean sale amount | 98,000.00 | 97,485.00 |
| Accrued interest collected | 1,000.00 | 808.33 |
| Terminal sale commission | −50.00 | −50.00 |
| Coupons received during the year | 4,000.00 | 4,850.00 |
| Residual cash from initial trades | 0.00 | 121.67 |
| Total ending wealth | 102,950.00 | 103,215.00 |
The replacement’s clean exit amount is $97,000 × 100.50 / 100 = $97,485. Adding the remaining components gives $103,215 − $102,950 = $265 more wealth from swapping under these assumptions.
A second calculation explains why the $850 extra annual coupons do not all survive. Buying the replacement at 101.00 and selling at 100.50 costs $97,000 × 0.50 / 100 = $485. The initial sale and purchase commissions cost another $100. The terminal commissions cancel in the comparison because both paths pay $50. Thus $850 − $485 − $100 = $265. The spread is already in the cash table; this calculation explains it rather than subtracting it again.
Under precisely these fixed-bid, zero-reinvestment, no-tax assumptions, the extra coupon entitlement accrues at $850 per 30/360 year against $585 of switching friction. Including accrued interest in liquidation wealth gives this narrow screen:
The cushion is small: if the replacement’s exit bid is just one price point lower, its sale proceeds fall by $97,000 × 1 / 100 = $970. The $265 advantage becomes $265 − $970 = a $705 shortfall, holding the old-bond outcome fixed. Actual price paths, defaults, reinvestment, taxes or changed terms require a new calculation. Dividing costs by the quoted YTM difference alone cannot establish a reliable payback time.
Types of Bond Swaps: Identify the Objective
Traditional labels distinguish the reason for a replacement. Substitution, intermarket-spread, rate-anticipation and pure-yield-pickup swaps appear in academic fixed-income teaching; investors also use quality, call-protection and tax swaps. Several motives can apply to one trade. [9] [1]
| Type | Objective | Test before trading |
|---|---|---|
| Substitution | Replace a holding with a near substitute believed cheaper | Are credit, maturity, options and liquidity sufficiently comparable to support the pricing judgment? |
| Intermarket spread | Change sectors because relative yield spreads appear attractive | Could the spread persist or widen, and what sector risks change? |
| Rate anticipation / maturity adjustment | Change duration or maturity for a rate view or cash need | What happens if the curve moves differently from the assumption? |
| Yield pickup | Increase yield or income | How much remains after costs, and what additional risk explains it? |
| Quality or call-protection swap | Improve credit exposure or protect expected cash flows | What income or price concession buys that protection? |
| Tax swap | Realize a tax loss while choosing replacement exposure | Is the loss deductible and usable, and is the replacement suitable after costs? |
The worked example is a yield/income pickup with longer duration and lower assumed credit quality. It does not demonstrate a mispriced substitute. A quality upgrade could rationally reduce yield; a shorter maturity could better match spending needs. For curve positioning itself, see yield curve strategies. Replacing fixed-rate debt with floating-rate bonds changes coupon-reset exposure too, so the fixed-coupon calculation above would need to be rebuilt.
Tax Swaps: Separate the Tax Result from the Trade
Reset to the initial sale. Suppose the held bond has a $100,000 adjusted tax basis, with no premium, OID or market-discount adjustments. Excluding the separately received accrued interest, capital sale proceeds after the $50 selling commission are $98,000 − $50 = $97,950, creating a potential $2,050 capital loss. Accrued interest and bond gain or loss need separate tax treatment. [2]
If that loss is fully deductible, long term and usable against gains otherwise taxed at a hypothetical incremental 20%, the conditional tax reduction is $2,050 × 20% = $410. It is not extra cash delivered with the trade or included in the $98,950 replacement budget. Loss utilization, later dispositions and tax rates affect the ultimate benefit.
The wash-sale rule can disallow a loss when substantially identical securities are acquired within 30 days before or after a loss sale. IRS Publication 550 requires considering the facts and circumstances. A different CUSIP, issuer label, coupon or maturity is not a blanket safe harbor; changing two of three terms is not an IRS test. Broker reporting does not determine whether a deduction is legally available. [2]
This federal discussion was checked in November 2026 using the available 2025 edition of Publication 550. It is not a replacement-security tax determination. Use actual terms, adjusted basis and relevant purchase history with a tax professional; state rules and account treatment can differ. The broader tax-aware portfolio management guide covers harvesting, lot selection and purchase-window planning.
How to Evaluate a Proposed Bond Swap
- State the purpose. Specify the income, credit, duration, liquidity or payment need the replacement should meet.
- Read both securities’ terms. Confirm identifiers, issuer, seniority, coupon schedule, maturity, day count, calls, minimum denominations and other contingencies.
- Obtain comparable quotes. Use the held bond’s sale bid and replacement’s purchase ask for the actual quantity and settlement date. Clarify included compensation and separate fees.
- Reconcile every dollar. Calculate dirty sale proceeds, net fees, replacement par and residual cash. Reserve separately for any tax or funding need.
- Compare the same horizon. Include dated coupons, their reinvestment, residual cash and net liquidation values for both alternatives. Test an unfavorable replacement bid as well as the preferred scenario.
- Review changed risks and execution. Check credit, duration, options and liquidity together. Confirm how a failed or partially filled leg affects funding and remaining exposure before placing orders.
Common Mistakes with Bond Swaps
- Matching par while ignoring extra cash. The same face amount can require a different investment.
- Calling the coupon pickup a return pickup. Price, principal repayment, timing and risk also matter.
- Treating purchased accrued interest as profit. Part of the next coupon reimburses cash already paid to the seller.
- Charging the spread twice. Use executable prices, then add only costs outside those prices.
- Comparing different exit assumptions. Model both alternatives on the same date and include residual cash.
- Letting a tax loss justify an unsuitable bond. Conditional tax savings do not remove credit, call or liquidity risk.
Limitations of a Bond-Swap Comparison
A precise spreadsheet or cash table can still rest on uncertain inputs. A firm bid can expire, the replacement may not be available in the needed size, and market moves between trades can change the budget. Cash-flow promises can fail, and a different issuer can introduce concentration or credit exposure that a yield comparison misses.
Our unchanged-price example isolates the arithmetic; it does not estimate the probability of a gain. A longer-horizon analysis must recognize maturities, redemption terms, reinvestment and taxes as they occur. The decision is whether the resulting portfolio better meets the investor’s needs after those changes, not whether one displayed yield is higher.
Frequently Asked Questions
Sources
- Raymond James: Bond Swaps — Optimizing Bond Portfolios. Replacement objectives and their risks; its tax commentary is not the tax authority used here.
- IRS Publication 550 (2025): Investment Income and Expenses. Wash Sales, Substantially identical and accrued interest on bonds; edition actually consulted.
- FINRA: Bonds. Price quotations, accrued interest, broker compensation and yield measures.
- CFA Institute: Fixed-Income Bond Valuation — Prices and Yields. Public 2026 curriculum overview: YTM assumptions and between-coupon pricing.
- CFA Institute: Yield-Based Bond Duration Measures and Properties. Public 2026 overview: modified duration and approximation limits.
- SEC Investor.gov: Bonds — FAQs. Credit, interest-rate, liquidity and call risks.
- SEC Investor.gov: Bonds, Selling Before Maturity. Early-sale prices and transaction costs.
- CFA Institute: Yield and Yield Spread Measures for Fixed-Rate Bonds. Public 2026 overview: compounding, options and spread interpretation.
- P. V. Viswanath, Pace University: Fixed Income Portfolio Management, 2000, Active Bond Management. Traditional swap terminology; not current tax guidance.
Sources accessed November 15, 2026. All security terms, prices, ratings and worked outcomes are hypothetical. Calculations retain unrounded values before display rounding.
Disclaimer
This article is for educational and informational purposes only and does not constitute investment or tax advice. Hypothetical comparisons are not forecasts, executable offers or recommendations. Actual results depend on security terms, prices, available quantities, execution, credit events, reinvestment, fees, taxes and individual circumstances. Consult qualified financial and tax professionals before acting.
